Lab 185 - MPLS L2 VPN

Prerequisites: CCNP level skills. Topology Pic.3 - MPLS Topology 3 Task 1 Based on the previous lab configuration, assume there is no MPLS ...

Lab 184 - L2TPv3

Prerequisites: CCNP level skills. Topology Pic1. MPLS Topology 3 Task 1 Assume there is no MPLS between PE1 (R1) and PE2  (R3) (remove LDP ...

Lab 183 - AToM Vlan Mode

Prerequisites: CCNP level skills. Topology Pic3. MPLS Topology 3 If you don't want to waste your time on configuring the above diagram, ...

Lab 182 - EIGRP SoO

Prerequisites: CCNP level skills. Note! CE3 and CE4 use BACKDOOR link (should be used by CE routers as a secondary path). Use the configurat...

Lab 181 - MPLS BGP Cost Community

Prerequisites: CCNP level skills. Note! This lab layout is based on the new physical topology presented  here . SW1 , SW2  are configured wi...

Lab 180 - MPLS Internet Access (as VPN)

Prerequisites: CCNP level skills. Note! This lab layout is based on the new physical topology presented  here . This lab assumes that you ha...

Lab 179 - MPLS Internet Access (via global table)

Prerequisites: CCNP level skills. Note! This lab layout is based on the new physical topology presented  here . This lab assumes that you ha...

Lab 178 - MPLS Common Services VPN

Prerequisites: CCNP level skills. Note! This lab layout is based on the new physical topology presented  here . This lab assumes that you ha...

Lab 177 - MPLS Overlapping VPNs

Prerequisites: CCNP level skills. Note! This lab layout is based on the new physical topology presented here . This lab assumes that you hav...

Switch statement in C++ programming

Switch statement Switch is also a control structure and it is used to select one option from a set of options. It compares the value of an e...