OSPF NSSA Area LSA7-to-5 Translator Election

Previous  |  Intermediate Level  | Next Task 1 In the task 3 of the previous lab you configured R3 as the gateway for all inter-area prefixe...

OSPF Stub Network Traffic Engineering

Previous  |  Intermediate Level  | Next Task 1 Remove the OSPF configuration done in the previous labs and configure network as per topology...

OSPF GRE Tunnel over NSSA/Stub Area

Previous  |  Intermediate Level  | Next Task 1 Configure OSPF area 58 between R5 and SW2 (Vlan 58). Ensure that Vlan 58 does have connectivi...

OSPF Not-So-Totally-Stubby Area

Previous  |  Intermediate Level  | Next Task 1 Change OSPF area 28 in such a way, that it does not allow external (E2) and inter-area (IA) p...

OSPF NSSA Filtering

Previous  |  Intermediate Level  | Next Task 1 On SW2 create two loopbacks and configure IP addresses as shown below. Loopback1: 192.168.8.8...

OSPF Totally Stubby Area Filtering

Previous  |  Intermediate Level  | Next Note! Since in our previous lab we have configured new loopbacks, R1 changes its ospf router id to t...

OSPF Stub Area Filtering

Previous  |  Intermediate Level  | Next Task 1 On R2 Remove the configuration from previous labs as follows: R2 Config: ! no ip route 1.1.1...