OSPF Problem 2

OSPF Problem 2
Di Posting Oleh : Simple Learning
Kategori : 10 Minute Lab OSPF




Try to solve the lab problem in 10 minutes or less.
  • Enable OSPF area 215 on the link of R1 in VLAN 215 (Fa0/1).
  • Enable OSPF area 27 on the link of R2 in VLAN 27 (Fa0/0).
  • Use �network� statement with wildcard mask that matches the network mask of the interface.
Pic.2


Extra Credit
Take as much time as you need to answer the following questions:
  1. What are the benefits of using OSPF multiple area topology?
  2. What do we call area 0 in OSPF multiple area topology?
  3. In the OSPF lab completed, what do you call R1 and R2 (routers connected to area 0 and other area)?
  4. What are LSA types: 1, 2, 3, 4, 5, 7 and what do they communicate in OSPF domain?
  5. What do we call an OSPF router whose all links belong to a single area?
  6. What do we call an OSPF router whose all links belong to an area 0?

When you have solved the problem check the hint(s) below:

Lab Hint
  • Does R1 see 172.16.27.0/24 in its routing table?
  • Does R2 see 172.16.215.0/24 in its routing table?
  • Does the ping sourced from Fas0/0 of R1 destined to 172.16.27.2 work?
  • How would you verify that VLAN 27 and VLAN 215 links belong to the areas specified in the task?

Your Feedback
If you find these labs useful, I would appreciate your feedback. Please send me an email as per following: 

Address: linuxed.jr at gmail.com
Subject: ten minute lab
Answers to the following questions:

1. Would you be interested in receiving answers to the TEN MINUTE LABS?
[yes/no]

2. If 'yes' to the first question: what format of the answers would you be interested in?
a) videos on youtube
b) this blog
c) both
d) other: (provide the format)

Thank you for your time.

0 Response to "OSPF Problem 2"

Post a Comment