Lab 132 - BGP Dampening

Lab 132 - BGP Dampening
Di Posting Oleh : Simple Learning
Kategori : BGP Core Technologies Routing

Prerequisites: CCNP level skills.

Topology

Pic. 1 - Topology Diagram.
Icons designed by: Andrzej Szoblik - http://www.newo.pl

Task 1
Configure R3 to use BGP dampening according to the following:
  • Penalty should be reduced by half after 10 minutes (default=15).
  • The dampened route must be reused when it reaches value of 700. (default=750).
  • Route should not be used when it reaches 2000 points (default=2000).
  • The routes that experience flaps should not be suppressed for more than 40. minutes (default=4 x half-time).
Solution

Task 1
Configure R3 to use BGP dampening according to the following:
  • Penalty should be reduced by half after 10 minutes (default=15).
  • The dampened route must be reused when it reaches value of 700. (default=750).
  • Route should not be used when it reaches 2000 points (default=2000).
  • The routes that experience flaps should not be suppressed for more than 40. minutes (default=4 x half-time).
R3 Configuration:
!
router bgp 123
 no synchronization
 bgp router-id 172.16.103.3
 bgp log-neighbor-changes
 bgp dampening 10 700 2000 40
 network 172.16.103.0 mask 255.255.255.0
 neighbor 10.1.13.1 remote-as 123
 neighbor 10.1.13.1 route-reflector-client
 neighbor 10.1.13.1 next-hop-self
 neighbor 10.1.23.2 remote-as 123
 neighbor 10.1.23.2 route-reflector-client
 neighbor 10.1.23.2 next-hop-self
 neighbor 10.1.35.5 remote-as 50
 no auto-summary
!

Verification:
Pic. 2 - BGP Dampening Parameters.

0 Response to "Lab 132 - BGP Dampening"

Post a Comment