Di Posting Oleh : Simple Learning
Kategori : IPv6
Prerequisites: CCNP level skills.
Topology
Notice!
In order to proceed to the next lab you must first complete all the previous labs (from lab 188 onwards).
Pic1. IPv6 Topology Diagram.
Task 1
Study the topology diagram above (Pic.1). Configure IPv6 addresses on Frame-Relay interfaces between R3, R4, and R6. Use 2001:0:0:0::x/64 address on those links where 'x' is the router number. Use link-local addresses shown below:
- R3 = FE80::3
- R4 = FE80::4
- R6 = FE80::6
Task 2
Enable RIPng '346' between R3, R4, and R6.
Task 3
Ensure full connectivity between the two RIPng domains presented in the topology diagram.
Solution
Task 1
Study the topology diagram above (Pic.1). Configure IPv6 addresses on Frame-Relay interfaces between R3, R4, and R6. Use 2001:0:0:0::x/64 address on those links where 'x' is the router number. Use link-local addresses shown below:
- R3 = FE80::3
- R4 = FE80::4
- R6 = FE80::6
R3 Config:
!interface Serial0/1
ip address 172.16.0.3 255.255.255.0
encapsulation frame-relay
ipv6 address FE80::3 link-local
ipv6 address 2001::3/64
clock rate 2000000
frame-relay map ipv6 2001::4 314
frame-relay map ipv6 2001::6 316
frame-relay map ipv6 FE80::6 316 broadcast
frame-relay map ipv6 FE80::4 314 broadcast
frame-relay map ip 172.16.0.3 314
frame-relay map ip 172.16.0.4 314 broadcast
frame-relay map ip 172.16.0.6 316 broadcast
no frame-relay inverse-arp
!
R4 Config:
!
interface Serial0/0
ip address 172.16.0.4 255.255.255.0
encapsulation frame-relay
ipv6 address FE80::4 link-local
ipv6 address 2001::4/64
clock rate 2000000
frame-relay map ipv6 2001::6 413
frame-relay map ipv6 2001::3 413
frame-relay map ipv6 FE80::3 413 broadcast
frame-relay map ip 172.16.0.3 413 broadcast
frame-relay map ip 172.16.0.4 413
frame-relay map ip 172.16.0.6 413
no frame-relay inverse-arp
!
R6 Config:
!interface Serial0/0
ip address 172.16.0.6 255.255.255.0
encapsulation frame-relay
ipv6 address FE80::6 link-local
ipv6 address 2001::6/64
clock rate 2000000
frame-relay map ipv6 2001::4 613
frame-relay map ipv6 2001::3 613
frame-relay map ipv6 FE80::3 613 broadcast
frame-relay map ip 172.16.0.6 613
frame-relay map ip 172.16.0.4 613
frame-relay map ip 172.16.0.3 613 broadcast
no frame-relay inverse-arp
!
Task 2
Enable RIPng '346' between R3, R4, and R6.
R3 Config:
!interface Serial0/1
ipv6 rip 346 enable
!
R4 Config:
!
ipv6 unicast-routing
!
interface Serial0/0ipv6 unicast-routing
!
ipv6 rip 346 enable
!
R6 Config:
!
ipv6 unicast-routing
!
interface Serial0/0ipv6 unicast-routing
!
ipv6 rip 346 enable
!
Task 3
Ensure full connectivity between the two RIPng domains presented in the topology diagram.
R3 Config:
!ipv6 router rip CCIE
redistribute connected
redistribute rip 346 metric 1
ipv6 router rip 346
redistribute connected
redistribute rip CCIE metric 1
no split-horizon
!
Notice!
Unlike IPv4 redistribution, IPv6 requires redistribute 'connected' command.
0 Response to "Lab 192 - RIPng Protocol Redistribution"
Post a Comment