Di Posting Oleh : Simple Learning
Kategori : IPv6
Prerequisites: CCNP level skills.
Topology
Notice!
IPv6 addresses have changed. Follow the below topology diagram and tasks to accomplish the goals.
Pic1. IPv6 Topology Diagram.
Task 1
Configure manual IPv6 addresses on Frame-Relay connections between R3, R4, and R6. IPv6 global addresses should reflect the topology diagram. Host portion of the address should be ::X. For link-local addresses use: FE80::X. In both cases 'X' is the router's number (3, 4, and 6).
Task 2
Enable OSPFv6 area 0 between the routers mentioned in Task 1 using the default OSPF mode. OSPF router's IDs should be as follows:
- R3 - 3.3.3.3
- R4 - 4.4.4.4
- R6 - 6.6.6.6
Task 3
Advertise into OSPF the following Loopback addresses:
- R3 - FC00:A:A:A::3/128
- R4 - FC00:A:A:A::4/128
- R6 - FC00:A:A:A::3/128
Solution
Task 1
Configure manual IPv6 addresses on Frame-Relay connections between R3, R4, and R6. IPv6 global addresses should reflect the topology diagram. Host portion of the address should be ::X. For link-local addresses use: FE80::X. In both cases 'X' is the router's number (3, 4, and 6).
R3 Config:
!
interface Serial0/1
encapsulation frame-relay
ipv6 address FE80::3 link-local
ipv6 address FC00::3/64
ipv6 ospf neighbor FE80::6
ipv6 ospf neighbor FE80::4
clock rate 2000000
frame-relay map ipv6 FC00::4 314
frame-relay map ipv6 FC00::6 316
frame-relay map ipv6 FE80::6 316
frame-relay map ipv6 FE80::4 314
no frame-relay inverse-arp
!
R4 Config:
!
interface Serial0/0
encapsulation frame-relay
ipv6 address FE80::4 link-local
ipv6 address FC00::4/64
ipv6 ospf priority 0
clock rate 2000000
frame-relay map ipv6 FE80::6 413
frame-relay map ipv6 FE80::3 413
frame-relay map ipv6 FC00::6 413
frame-relay map ipv6 FC00::3 413
no frame-relay inverse-arp
!
R6 Config:
!
interface Serial0/0
encapsulation frame-relay
ipv6 address FE80::6 link-local
ipv6 address FC00::6/64
ipv6 ospf priority 0
clock rate 2000000
frame-relay map ipv6 FE80::4 613
frame-relay map ipv6 FE80::3 613
frame-relay map ipv6 FC00::4 613
frame-relay map ipv6 FC00::3 613
no frame-relay inverse-arp
!
Task 2
Enable OSPFv6 area 0 between the routers mentioned in Task 1 using the default OSPF mode. OSPF router's IDs should be as follows:
- R3 - 3.3.3.3
- R4 - 4.4.4.4
- R6 - 6.6.6.6
R3 Config:
!ipv6 unicast-routing
!
ipv6 router ospf 1
router-id 3.3.3.3
!
interface Serial0/1
ipv6 ospf neighbor FE80::6
ipv6 ospf neighbor FE80::4
ipv6 ospf 1 area 0
! R4 Config:
!
ipv6 unicast-routing!
ipv6 router ospf 1
router-id 4.4.4.4
!
interface Serial0/0
ipv6 ospf 1 area 0
ipv6 ospf priority 0
!
R6 Config:
!ipv6 unicast-routing
!
ipv6 router ospf 1
router-id 6.6.6.6
!
interface Serial0/0
ipv6 ospf 1 area 0
ipv6 ospf priority 0
!
Verification:
Pic.2 - R3's OSPFv3 Neighbors.
Task 3
Advertise into OSPF the following Loopback addresses:
- R3 - FC00:A:A:A::3/128
- R4 - FC00:A:A:A::4/128
- R6 - FC00:A:A:A::3/128
R3 Config:
!
0 Response to "Lab 202 - OSPFv3 in NBMA Networks"
Post a Comment