Di Posting Oleh : Simple Learning
Kategori : Core Technologies RIP Routing
Prerequisites: CCNP level skills.
Topology
Task1
Configure R3 to advertise a default to its RIP neighbors. Do not advertise the default route towards R5.
Lab Solution
Task1
Configure R3 to advertise a default to its RIP neighbors. Do not advertise the default route towards R5.
R3 Configuration:
!
route-map DEFAULT_ROUTE permit 10
set interface Serial0/1 Serial0/2
!
set interface Serial0/1 Serial0/2
!
router rip
version 2
passive-interface Loopback0
network 10.0.0.0
network 172.16.0.0
default-information originate route-map DEFAULT_ROUTE
no auto-summary
version 2
passive-interface Loopback0
network 10.0.0.0
network 172.16.0.0
default-information originate route-map DEFAULT_ROUTE
no auto-summary
!
Verification:
Pic. 2 - RIP Update towards R1.
Pic. 3 - RIP Update towards R2.
Pic. 4 - RIP Update towards R5.
RIP update towards R5 does NOT contain a default route.
Pic. 5 - R3's Routing Table.
Unlike OSPF or EIGRP, R3 does NOT install a discard route (0.0.0.0/0 via Null0).
0 Response to "Lab 64 - RIPv2 Default Routing"
Post a Comment