Di Posting Oleh : Simple Learning
Kategori : BGP Core Technologies Routing
Prerequisites: CCNP level skills.
Note!
Use Lab 86 configuration.
Topology
Task 1
Configure BGP authentication between R1 and R3. Use the password Cisco13.
Lab Solution
Task 1
Configure BGP authentication between R1 and R3. Use password Cisco13.
R1 Configuration:
!
router bgp 10
no synchronization
bgp router-id 1.1.1.1
bgp log-neighbor-changes
neighbor 172.16.103.3 remote-as 30
neighbor 172.16.103.3 password Cisco13
neighbor 172.16.103.3 disable-connected-check
neighbor 172.16.103.3 update-source Loopback0
no auto-summary
no synchronization
bgp router-id 1.1.1.1
bgp log-neighbor-changes
neighbor 172.16.103.3 remote-as 30
neighbor 172.16.103.3 password Cisco13
neighbor 172.16.103.3 disable-connected-check
neighbor 172.16.103.3 update-source Loopback0
no auto-summary
!
R3 Configuration:
!
router bgp 30
no synchronization
bgp router-id 3.3.3.3
bgp log-neighbor-changes
neighbor 172.16.101.1 remote-as 10
neighbor 172.16.101.1 password Cisco13
neighbor 172.16.101.1 disable-connected-check
neighbor 172.16.101.1 update-source Loopback0
no auto-summary
no synchronization
bgp router-id 3.3.3.3
bgp log-neighbor-changes
neighbor 172.16.101.1 remote-as 10
neighbor 172.16.101.1 password Cisco13
neighbor 172.16.101.1 disable-connected-check
neighbor 172.16.101.1 update-source Loopback0
no auto-summary
!
Notice!
BGP supports MD5 authentication only.
Verification:
Pic. 2 - BGP Authentication.
0 Response to "Lab 87 - BGP Authentication"
Post a Comment